Hotends

Pièce maitresse sur une imprimante 3D.

Exigez la qualité pour des impressions parfaites.

Active filters

  • PTFE Tube 2/4 mm

    €3.33

     PTFE Tube

    Inner Diameter : 2 mm
    External Diameter  : 4 mm

    Use for deported extrudeur  (Bowden)

    Sold by the meter.

  • NiTro nozzles

    €9.50

    Nitro nozzle 0.40 mm, for 1.75 mm filaments

    Threaded M6 Coated with Hard Nickel Chemical treatment (63 Hrc - 900 H) + heat treatment.

    This nozzle is 10 times stronger than a brass nozzle.

    Machined and processed in FRANCE !!!

    It is compatible for the following hotends:

    • AiO_EvO
    • E3D
    • Hexagon
    • Zortrax M200
    • Ultimaker, 2, 2+
    • 3NTR
    • MK8
    • CR10, Cr10S
    • Tronxy
    • Anet8
    • ...
  • NiTro nozzles Pack

    €24.08

    NiTro nozzles pack (0.20 / 0.40 and 0.80 mm), for 1.75 mm filaments

    Threaded in M6 Coated with Hard Nickel Chemical treatment (63 Hrc - 900 H) + heat treatment.

    These nozzles are 10 times stronger than a brass nozzle.

    Machined and processed in FRANCE !!!

    They are compatible for the following hotends:

    • AiO_EvO
    • E3D
    • Hexagon
    • MK8
    • ....
  • Thermal paste

    €1.50

    The thermal paste allows to fill the imperfections between 2 surfaces with a substance whose thermal conductivity is much higher than the one of air.

    The contact surface between the heatbreak and the heatsink is thus more important, and thus the thermal transfer will be carried out more effectively to evacuate the calories.

    Bag of 1Gr .

  • Tube Capricorn XS 1.9x4mm

    €14.28

     PTFE Tube

    Inner Diameter : 2 mm
    External Diameter  : 4 mm

    Use for deported extrudeur  (Bowden)

    Sold by the meter.

  • FEP tube

    €4.69

    FEP tube, for applications that require more visibility, protects your tube between the coil and the extruder.

    Temperature range from -190°C to +205°C

    BE CAREFUL, not suitable for the heatbreak of a hotend, this tube must not touch the nozzle, it will not resist to this temperature.

    Sold by meter and delivered in one length

  • Heatbreak CR10S_PRO/MAX M6

    €9.92

    Heatbreak M6 0.75mm x M6 1.00mm

    Allows mounting of standard M6 heatpacks and nozzles on CR10SPRO/MAX/V2 printers

    Compatible with our AiO V2 heater block and Nitro nozzles.

    Available in 3 versions (Alone, with AiO V2 heater, with standard heater)

  • Hotend "All In ONE - EvO" V2

    €66.58

    New Hotend AiO V2 !

    Even more efficient, more powerful, faster!

    Titanium heatbreak, 60 W heating element, Nickel anti-wear nozzle

    Available in several versions

    Hotend delivered mounted/tested with thermal paste already on the heatbreak

    Can be mounted on our Smart AiO support (Fan duct V2)

  • AiO V2 heater

    €23.92

    AiO V2 heater

    Power: 60 Watts

    Voltage: 12 & 24 V - Plot 1/0 (12V), Plot 0/2 (24V) 

    Supplied with a 1 meter cable + Molex Microfit 2.0 connector

    Thermistor slot 

    Backwards compatible with AiO V1 (Heat body + Titanium heatbreak)

    Compatible with our Cr10S_PRO/MAX heatbreak and all M6 x1.0 threaded heatbreaks

    WARNING > Delivered without silicone protection, nor thermistor

  • Heatsink AiO V1/V2

    €12.42

    Aluminum heatsink for AiO V1 & V2, with zinc plated steel top plate for MagnetFIT.

  • AiO V2 silicone protection

    €1.83

    AiO V2 silicone protection, protects and insulates your heating element.

    Resistant to +350°C, beyond that a fiberglass protection is required.

  • Watercooling block H²O

    €199.00

    Liquid cooling block for hotends.

    Developed and optimized for 3D printing.

    Supplied with hoses and biocide liquid.