Spare parts
-
Hollow Hexagonal Oval Head - TBHC Stainless Steel A2 Iso 7380
€0.60Set of 10 Hollow Hexagon Head Screws - TBHC Stainless Steel A2 Iso 7380
Choose the diameter and length
-
Vis à Six Pans Creux - TCHC Inox A2 Filetage Total Din 912
€1.50Set of 10 Hollow Hex Screws - TCHC Stainless Steel A2 Total Thread Din 912
Reference > M3x35 in steel 8.8 black
Choose the diameter and length
-
Tête Fraisée Hexagonale Creuse - Inox A2 DIN7791
€1.80Set of 10 Hollow Hexagon Countersunk Head Screws - Stainless Steel A2 DIN7791
Choose the Diameter and the Length
-
Vis à Six Pans Creux : Bout Plat - STHC Bout Plat Inox A2 Din 913
€1.50Set of 10 Hollow Hex Screws : Flat End - STHC Flat End Din 913
M3- Stainless Steel A2
M4- Black steel
M6- Black Steel
Choose the Diameter and length
-
Endstop
€2.78Limit switch for 3D printers, for X, Y and Z axis and filament sensor
Supplied with a 1 meter cable, 3 pins JST-HX.
Possibility to supply on 2 (GND,Signal) or 3 pins ( 5V,GND,Signal) according to your board.
-
Blower 4020 S
€4.70Blower 4020 S
Dimensions: 40 x 40 x 20 mm
Voltage : 12 or 24 Volt
Speed : 6500 rpm
Flow rate : 5.4 m3/h
Noise level : 28 Db
Weight : 22 Gr
Cable : 30 cm with JST connectorFor the cooling of the parts during the printing process.
-
Blower 5015
€4.50Blower 5015 , 24 Volt
Available in 2 versions :
- Bronze bearing
- Double bearing (Premium quality, quieter)
For the cooling of the parts during the printing process.
-
-
Ceramic heating ring
€9.50Ceramic heating ring
Internal diameter: 8.5 mm
External diameter: 10.5 mm
Height: 8.5 mm
Resistance: 3.6 Ohms
Delivered with its 700 mm long cable and Molex connector
Suitable for the manufacture of very small heating elements