Capricorn XS - 3.00 x 2.00 mm€4.08
The Heatbreak PTFE tubing you've been looking for!
This 3.00 x 2.00 mm thermal break tubing is made of the same high performance material as the XS series Bowden tubing, but is sized for heatbreak.
A PTFE heat break jacket was a frequently requested item by fans of the XS Bowden tube, so it was put into production.
Sent out and tested worldwide, the feedback was excellent. It is now one of our most popular items!
An average thermal cut requires about 30 mm of tube or less. Sold in 30 cm length, which is enough to make 10 heatbreaks.
Heatbreak NOT PROVIDED
Artillery Quick Tool Change (QTC)€20.75
Magnetic system for quick tool change.
A magnetic support on the printer side and a tool support (extruder, laser, etc.) can be removed from the printer in 2 seconds.
This accessory allows :
- Facilitate considerably the maintenance of the extruder (Cleaning nozzle, change probe, cartridge, etc...)
- Quickly switch to another extruder already pre-equipped with another nozzle diameter (0.6/0.8/1 mm ....)
- Make your printer versatile (Laser, Plotter, Vinyl cutter, etc.)
Compatible with Artillery printers (Sidewinder X1, X2, Genius, Genius PRO)
Compatible with our products:
Artillery Original Extruder + Nitromax nozzle (choice of nozzle)
Volcano heater block Copper plated Nickel€12.42
Volcano heater block
Material: Copper plated Nickel
Dimensions: Height: 20 mm, Width: 11.5 mm, Length: 24 mm
High quality machining
Improves the temperature resistance
Sold with blue silicone protection.
Available in Pack with NitroMAX 0.40mm nozzle >>Pack Volcano Max
- On sale!
Extrusion sprockets BMG€16.58
Extrusion sprockets for Bondtech (BMG) extruder or clone.
Made of hardened steel, CNC machined.
Perfect grip of the filament
Bore 5mm, for 1.75 mm filaments
- 1 x Sprocket with M3 screw
- 1 x Lever gear
- 1 x Hex key 1.5 mm
Neopixel board Sidewinder X1€5.67
Card allowing to put back in function the lighting led (Neopixel colors) on Sidewinder X1:
- With our TouchMI sensor & Firmware TFT BigTreeTech
- or with the stock sensor.
Does not work with stock firmware.
The card is inserted on the connector of the original RGB led.
Card delivered "pre-wired" without TouchMI sensor or "to be soldered" for the original sensor mounting.
TouchMI sensor + led card available HERE
WARNING, you need to reflash the firmware of the MKS and TFT card on your Sidewinder X1 (SeeHERE tutorial files)
Translated with www.DeepL.com/Translator (free version)
- On sale!
FEP tube, for applications that require more visibility, protects your tube between the coil and the extruder.
Temperature range from -190°C to +205°C
BE CAREFUL, not suitable for the heatbreak of a hotend, this tube must not touch the nozzle, it will not resist to this temperature.
Sold by meter and delivered in one length
NiTro nozzles Pack€24.08
NiTro nozzles pack (0.20 / 0.40 and 0.80 mm), for 1.75 mm filaments
Threaded in M6 Coated with Hard Nickel Chemical treatment (63 Hrc - 900 H) + heat treatment.
These nozzles are 10 times stronger than a brass nozzle.
Machined and processed in FRANCE !!!
They are compatible for the following hotends:
Heatbreak Titanium AiO V2€12.33
Heatbreak Titanium AiO V2
Aerospace grade alloy TA6V - Grade 5
Very low thermal conductivity (6.7), 2.5 times less than a conventional stainless steel heatbreak ( 16.3)
Reduces the heat exchange between the heating element and the heat sink
Reduces considerably the possible jamming of filament on Hotend Full Metal
Volcano Nozzle 0.40 mm + PTFE€4.08
Volcano Official Artillery Nozzle 0.40 mm
Supplied with Original PTFE Heatbreak.