Hotend AiO_EvO

NTC 100 K plug-in cabled thermistor.

Silicone HT protection for hotend AiO_EvO

Color Translucent blue

Max temperature : 315°C

Sold by set of 2

The thermal paste allows to fill the imperfections between 2 surfaces with a substance whose thermal conductivity is much higher than the one of air.

The contact surface between the heatbreak and the heatsink is thus more important, and thus the thermal transfer will be carried out more effectively to evacuate the calories.

Bag of 1Gr .

Ventilator 25x25x10 mm

Tension : 12VDC

Length thread : 700mm

NiTro nozzles pack (0.20 / 0.40 and 0.80 mm), for 1.75 mm filaments

Threaded in M6 Coated with Hard Nickel Chemical treatment (63 Hrc - 900 H) + heat treatment.

These nozzles are 10 times stronger than a brass nozzle.

Machined and processed in FRANCE !!!

They are compatible for the following hotends:

• AiO_EvO
• E3D
• Hexagon
• MK8
• ....

Nitro nozzle 0.40 mm, for 1.75 mm filaments

Threaded M6 Coated with Hard Nickel Chemical treatment (63 Hrc - 900 H) + heat treatment.

This nozzle is 10 times stronger than a brass nozzle.

Machined and processed in FRANCE !!!

It is compatible for the following hotends:

• AiO_EvO
• E3D
• Hexagon
• Zortrax M200
• Ultimaker, 2, 2+
• 3NTR
• MK8
• CR10, Cr10S
• Tronxy
• Anet8
• ...

Magnet-FIT, the fast and long-lasting connectivity for your hotend.

Ceramic heating ring

Internal diameter: 8.5 mm

External diameter: 10.5 mm

Height: 8.5 mm

Resistance: 3.6 Ohms

Delivered with its 700 mm long cable and Molex connector 

Suitable for the manufacture of very small heating elements

AiO V2 heater

Power: 60 Watts

Voltage: 12 & 24 V - Plot 1/0 (12V), Plot 0/2 (24V) 

Supplied with a 1 meter cable + Molex Microfit 2.0 connector

Thermistor slot 

Backwards compatible with AiO V1 (Heat body + Titanium heatbreak)

Compatible with our Cr10S_PRO/MAX heatbreak and all M6 x1.0 threaded heatbreaks

WARNING > Delivered without silicone protection, nor thermistor

Aluminum heatsink for AiO V1 & V2, with zinc plated steel top plate for MagnetFIT.