Hotend Aio V2

New Hotend AiO V2 !

Even more efficient, more powerful, faster!

Titanium heatbreak, 60 W heating element, Nickel anti-wear nozzle

Available in several versions

Hotend delivered mounted/tested with thermal paste already on the heatbreak

Can be mounted on our Smart AiO support (Fan duct V2)

NTC 100 K plug-in cabled thermistor.

Cooling ventilator

Dimensions : 30x30x10 mm

Speed : 10000 Rpm.

Tension : 12 Volt

Type of bearing : double bearing

Length thread : 700 mm

The thermal paste allows to fill the imperfections between 2 surfaces with a substance whose thermal conductivity is much higher than the one of air.

The contact surface between the heatbreak and the heatsink is thus more important, and thus the thermal transfer will be carried out more effectively to evacuate the calories.

Bag of 1Gr .

NiTro nozzles pack (0.20 / 0.40 and 0.80 mm), for 1.75 mm filaments

Threaded in M6 Coated with Hard Nickel Chemical treatment (63 Hrc - 900 H) + heat treatment.

These nozzles are 10 times stronger than a brass nozzle.

Machined and processed in FRANCE !!!

They are compatible for the following hotends:

• AiO_EvO
• E3D
• Hexagon
• MK8
• ....

Nitro nozzle 0.40 mm, for 1.75 mm filaments

Threaded M6 Coated with Hard Nickel Chemical treatment (63 Hrc - 900 H) + heat treatment.

This nozzle is 10 times stronger than a brass nozzle.

Machined and processed in FRANCE !!!

It is compatible for the following hotends:

• AiO_EvO
• E3D
• Hexagon
• Zortrax M200
• Ultimaker, 2, 2+
• 3NTR
• MK8
• CR10, Cr10S
• Tronxy
• Anet8
• ...

Magnet-FIT, the fast and long-lasting connectivity for your hotend.

AiO V2 heater

Power: 60 Watts

Voltage: 12 & 24 V - Plot 1/0 (12V), Plot 0/2 (24V) 

Supplied with a 1 meter cable + Molex Microfit 2.0 connector

Thermistor slot 

Backwards compatible with AiO V1 (Heat body + Titanium heatbreak)

Compatible with our Cr10S_PRO/MAX heatbreak and all M6 x1.0 threaded heatbreaks

WARNING > Delivered without silicone protection, nor thermistor

Heatbreak Titanium AiO V2

Aerospace grade alloy TA6V - Grade 5

Very low thermal conductivity (6.7), 2.5 times less than a conventional stainless steel heatbreak ( 16.3)

Reduces the heat exchange between the heating element and the heat sink

Reduces considerably the possible jamming of filament on Hotend Full Metal

Aluminum heatsink for AiO V1 & V2, with zinc plated steel top plate for MagnetFIT.

AiO V2 silicone protection, protects and insulates your heating element.

Resistant to +350°C, beyond that a fiberglass protection is required.