Out-of-Stock

Hotend "All In ONE - EvO"

€57.40

Hotend new generation !!!

All in ONE-EvO, designed and machined in France.

Equipped with a one-piece ceramic heater + a set of 3 hard nozzles (0.20 / 0.40 and 0.80 mm).

Characteristics:

For 1.75 mm filaments
Deported and Direct Drive Mount
Voltage: 12 or 24 Volt
Nozzle: Kit of 3 nozzles "Nitro" (0.20 / 0.40 & 0.80 mm)
Length: 61.85 mm
Diameter: 16 mm

Voltage

Extrudeur

Quantity

Out-of-Stock

Genesis of the hotend " AiO_EvO ".

Who was not ever confronted has one of these situations?

Connections pneufit breakable, Backlash
Leaks on the heater
Radiation of the heater on printing parts
Slow temperature's rise
Regulation of temperature
Blocking of extrusion
Premature wear of the nozzle
Uncoupling of the temperature sensor
Tangential heating zone
.....

Hotend " All In ONE-EvO " is the solution to the diverse problems known in 3D printing.
All points were analyzed, corrected and improved.
To guarantee you an optimal quality, we chose to make manufacture our parts in France.
All our hotends are assembled and controlled before shipment.

What in the box

A zinc-plated spacer M6
A cooler aluminum
A heater on connectors 3 NiTro nozzles (in 0.20/0.40 and 0.80 mm)
A silicon cover
A thermistor NTC 100 K
A ventilator 25x25x10 mm
A ventilation shaft 2 screws TF 2.5x 16mm
A bag of thermal paste
A Nylon zip tie 2.5 x 100 mm
A supply cable for heater
A cable for probe

Brand Hotends.FR

Reference AiO_EvO_DD12

Specific References

Show attestation

1★

2★

3★

4★

5★

9.8/10

Based on 90 reviews

Sauveur M.
Published 24/08/2019 à 22:10 (Order date: 29/07/2019)

5

Bons produits, chauffe rapide et changement de filament sans tracas. Merci Hotend.fr.
LAURENT P.
Published 09/08/2019 à 15:06 (Order date: 15/07/2019)

5

Pas de problèmes
JEAN-FRANCOIS M.
Published 09/08/2019 à 12:14 (Order date: 24/07/2019)

4

Quelques difficultés au montage. Beaucoup trop de soudure de fils à faire à mon goût; il faudrait prévoir un kit avec différentes sortes d'adaptateur et plus de pâtes thermiques. Le mode d'emploi aurait besoin d'être clarifié sur comment placer la sonde de température car les photos fournies sont trop petites (on ne peut pas zoomer). Ensuite il a fallu faire les réglages d'utilisation habituels. Peut être fournir quelques pour les imprimantes les plus vendues.
Wilfried A.
Published 12/06/2019 à 00:45 (Order date: 14/05/2019)

5

Super ! Rien à redire
Emmanuel c.
Published 07/06/2019 à 17:08 (Order date: 23/05/2019)

5

Too